Alcrudo, Francisco

Associate Professor (University of Zaragoza) Ph.D. in physics. Associate Professor of Fluid Mechanics at the Engineering and Architecture School of the University of Zaragoza since 2000. Interests include CFD, compressible flows and turbomachinery. Among other research visits he has been Invited Professor at Institut National de Sciences Apliquées de Rouen and Université Paris XIII

Read More

Álvarez de los Corrales, Diego

Compressors and process consultant Mechanical Engineer from Barcelona University (ETSIIB). During 18 years (1974 -1992) Manager of Mechanical and Transfer Heat Department of INITEC TECNICAS REUNIDAS. Since 1993 working in INITEC process department as consultant to resolve the problems related to the interface between the compressors and the processes (control). Professor at the Technical Engineering…

Read More

Atienza Santos, David

David Atienza Santos Industrial Engineer from Madrid University (ETSIIM – UPM). He has over 9 years in Técnicas Reunidas Group, for Oil & Gas projects and Nitric Plant Projects as an Engineer and Leader Engineer in Pressure Vessels and Storage Tanks department. He has huge experience with international Codes ASME, API, Licensor specifications; among others,…

Read More

Baron, Hervé

Hervé has 20 years of experience on Oil & Gas Projects.He held various Engineering and Project manager positions on FEED and EPC jobs, for both on-shore and off-shore facilities.

Read More

Botermans, Rutger

Currently director at Red-Bag. Various management positions and Project Manager of capital investment projects in the petrochemical industry, including engineering contractors, an operator owner and a fabricator.

Read More

Bueno López, Tomás

Atlas Copco Gas and Process Sales Manager Spain & Portugal B.S. degree in Mechanical Engineer from the E.T.S.I. I. in Madrid. Tomás holds 18 years of experience with centrifugal and rotary compressor equipment, specially focused in supporting EPC projects destination worldwide on complex contracts with highly loaded specs, mainly on compressed air and now extended…

Read More

Dooley, Anton

Currently working as the Lead Piping Designer on a mining & minerals project in Canada, Anton has over 20 years of piping design experience.

Read More

Fernández-Coronado, Iván

Ivan Fernandez has a BSc in Industrial Engineering and an MSc in Engineering Design. He has more than 10 years of work experience, most of it dedicated to engineering projects for the Gas & Oil industry, Mining Industry and Energy Generation.

Read More

Fernández-Valdés, César

Rotating Machinery Manager at Repsol His group is responsible for the specification, selection testing, installation, commissioning and start-up of all the rotating equipment for REPSOL investment projects in refineries, chemical and gas plants, pipelines and upstream production facilities. Other responsibilities include troubleshooting rotating machinery, the promotion of new technologies throughout the company, reliability engineering, and…

Read More

Ferreira, Germán

Holds a B.Sc. (Hons) in Chemical Engineering by University of Carabobo – Venezuela, M.Sc. in Eco-efficiency, Saving Energy and Industrial Ecology by University of Zaragoza – Spain.

Read More

Fukushima, Yasuo

Technical Director, Machinery systems Division, Infrastructure Systems Company (Hitachi Ltd.) Ph.D in Mechanical Engineering (Kyushu-University, Japan), and the Professional Engineer (Mechanical Engineering) in Japan. 40 years experiences in R&D, application engineering in Centrifugal compressors, Rotary compressors, Reciprocating compressors and Pumps in Hitachi. He had been promoting the spread of the Turbomachinery technology as the Vice…

Read More

Ganapathy, Balasubramaniam

Ganapathy Balasubramaniam Mechanical engineer, 30 years experienced in oil & gas industry with leading Indian state owned oil & gas firm HPCL in operations, engineering and management. He has rich experience in static equipment’s, managing downstream assets as terminal manager, engineering manager and operations manager. He conducts training programs in mechanical engineering, Design, codes &…

Read More

García-Lozano, J.

Working as project engineering manager, corporate pipe stress&supports manager, lead piping engineer, stress analyst and supports specialist during the last 13 years for EPC projects including upstream, LNG, refinery and combined cycle plants.

Read More

García, Anabel

Manufacturing Technology Lead in Electricity, Automation, Instrumentation & Control in Cargill Agricultural Supply Chain for Europe, Middle East & Africa Chemical Engineer-Instrumentation, System and Automatization Specialist, Valladolid University, 1999. Postgraduate in Engineering of Process and Systems, 1999/2001. She has studied a Master in Instrumentation and Process Control (by ISA and Repsol Training Center), and she…

Read More

Ghorbani, Alireza

He has BSc. and MSc. degrees in mechanical engineering and about 24 years experience in piping design and engineering

Read More

Gonzalez Otero, Sara

Sara has more than 10 years of international career in Técnicas Reunidas Group, for Oil & Gas projects, as an Engineer and Leader Engineer in Instrumentation and Control.

Read More

González-Mazzocchin, Juan Carlos

Mechanical engineer with a MSc in Mechanical Engineering. He has been working as piping stress analyst for the last ten years, with extensive knowledge in cryogenics piping systems and expansion joints.

Read More

Harris, Norman

Norman has spent nearly all his career in the process Industries. He has been based on Malaysia, Norway, Holland and the USA.

Read More

Hauke, Guillermo

Professor (University of Zaragoza) Ph.D. in Mechanical Engineering, Stanford University, 1995. MEC/Fulbright scholar 1989-1994. B.E.-M.E. in Mechanical Engineering, Engineering School, University of Zaragoza, 1989. After completing his Ph.D., he joined the Faculty of the Engineering and Architecture School of the University of Zaragoza. Research interests include computational mechanics, finite element methods and a posteriori error…

Read More

He, Minhui

Machinery Consultant, BRG Machinery Consulting LLC. USA Ph.D. in Mechanical and Aerospace Engineering (University of Virginia, 2003). Dr. He received his B.S. degree (Chemical Machinery Engineering, 1994) from Sichuan University in China. From 1996 to 2003, he conducted research on fluid film journal bearings in the ROMAC Laboratories at the University of Virginia. As a…

Read More

Subscribe to our Newsletter

The International Institute of Plant Engineering and Design is established in February 2011 as a joint venture between Spanish universities and Red-Bag (The Netherlands).


Are you interested in teaching your experience? Find out more about becoming a partner of InIPED.

InIPED recognizes and respects the privacy of the users of this Web site. When you choose to provide us with information about yourself, InIPED will act in a responsible manner.

Training course registration fee includes the full training program of electronic course material. All indicated rates for the courses are exclusive VAT.

Discover Mastercard Visa Payment Discover Mastercard

Payment options